Orders $300 and over eligible for free ground shipping within the 48 contiguous states!

 
 
 
 
 
 
 

LINK Flash Unit

$895.95
SKU: LINK800
Eligible for FREE Shipping for orders over $300!

Overview

The LINK Flash Unit features HSS and TTL flash capabilities, a built-in receiver, an 800W equivalent daylight balanced modeling light (great for video and continuous work), and an optional detachable battery with over 250 full power flashes on a single charge. The HSS and TTL capabilities will be controlled by the HUB remote (initially available for Nikon and Canon, Sony and others to follow). The battery and the charger are sold separately. The charger is able to charge two batteries consecutively. 

FEATURED PRODUCT IN PROFESSIONAL PHOTOGRAPHER'S 'HOT ONES' 2021!

LINK Flash Unit FAQs

Perfect for: Professional photographers in any field looking for versatility both inside and outside the studio.

FEATURES
9 f-stop power variability (3.1 Ws to 800 Ws)
Adjustable in precise 1/10 f-stops
All-digital control from LCD display
Built-in CyberSync Transceiver
Compatible with CST2, CyberCommander and CyberSense remotes*
Global plug-and-play from 100 to 240 VAC
Available Modes: ACTION, COLOR, HSS (up to 1/8000 sec.), TTL
Action stopping flash durations as short as 1/18,600 sec. (t.1)
Color consistency +/- 50K at any power
Bright, adjustable 800W Equivalent Daylight-Balanced LED Modeling Lamp
Rubber diffusion dome cover
Audible and visual recycle indicators
Built-in battery connection 
Uses Paul C. Buff™ Standard Flashtube
 
*These transmitters do not allow for HSS and TTL capabilities.
ARRIVES WITH
Magnetic rubber diffusion dome
LINK shipping cover
Flashtube
15' power cord
30-Day Absolute Satisfaction Guarantee
2-Year Factory Warranty
LINK Product Manual

Product Video

Product Video

Product Specs

  LINK Flash Unit
Watt seconds 800 Ws
Action Mode - Power Variability 9 f-stops (full to 1/256 power)
Color Mode - Power Variability 9 f-stops (full to 1/256 power)
HSS Mode - Power Variability 9 f-stops (full to 1/256 power)
Recycle to Full 3.5 sec.
Flash Duration (t.5) - in Action Mode 1/1,400 sec. (at full power) | 1/42,000 sec. (at minimum power)
Flash Duration (t.1) - in Action Mode 1/520 sec. (at full power) | 1/17,300 sec. (at minimum power)
Flash Duration (t.5) - in Color Mode 1/1,400 sec. (at full power) | 1/8,200 sec. (at minimum power)
Flash Duration (t.1) - in Color Mode 1/520 sec. (at full power) | 1/5,500 sec. (at minimum power)
Power Requirements Input Power: 95 - 265VAC, 50/60Hz
Average Current Draw 4.5 amps
Internal Receiver Range (from rear of unit) Front: 175' | Right: 290' | Left: 325' | Rear: 310'
Sync / Trigger Voltage Less than 5 volts (safe for use with DSLR cameras)
Modeling Lamp 800 W Equivalent Daylight-Balanced
Modeling Lamp Usage ~60 mins. at full power on a fully charged battery
Modeling Lamp Fan Audibility (Full) 35dBA (650w equivalent)
LUX at 6' with bare bulb 320lx
LUX at 6' with diffusion dome 230lx
LUX at 6' with diffusion dome and 8.5HOR 600lx
LUX at 3' with bare bulb 1280lx
LUX at 3' with diffusion dome 920lx
LUX at 3' with diffusion dome and 8.5HOR 2400lx
Flashtube 14mm single-ring flashtube (daylight-balanced and UV-coated)
LCD Display 3.5" display
Stand Mount Fits stands up to 5/8 in.
Umbrella Mount Accepts umbrella rods up to 9mm
Weight 7 lbs. 8 oz.
Weight with Battery 8 lbs. 11 oz.
Dimensions 6.5 in. (height) x 4.875 in. (diameter) x 12.625 in. (length)

Dimensions Note: length measurements taken from the front of the shipping cover (in place on the unit’s faceplate) to the back panel; height measurements taken from the top of the flash unit to the bottom of the light stand top coupler, folded back underneath the unit; width measurements taken from side to side at the widest points