Overview
The CyberSync™ Transceiver is designed for use with DigiBee, Einstein™, LINK, and Celestial flash units. The transceiver fits into the receptacle located on each flash unit. This forms an all-digital interface between the flash unit and the CyberSync™ Trigger Transmitter 2 (CST2 and CST3), CyberSense remote, the Cyber Commander™, and the discontinued CST. The Transceiver is powered by the flash unit that it is connected to with the frequency and channel selection being made on the back panel of the flash unit.
- Features
- All-digital Transceiver
- Compatible with DigiBee and Einstein™ flash units ONLY
- Can be used with the CyberSync™ Trigger Transmitter (CST2 and CST3), or discontinued CST, for wireless firing
- Full adjustment and wireless firing when used with the Cyber Commander™
- NOT compatible with AlienBees™ or White Lightning™ flash units
- Arrives With
- (1) Transceiver
- Rubber pin cover, attached
- 30-Day Absolute Satisfaction Guarantee
- 2-Year Factory Warranty
Product Video
Dimensions / Technical Specs
| CyberSync™ Transceiver | |
|---|---|
| Dimensions | 1 in. (width) x 2.75 in. (height) x 0.375 in.(depth) |
| System Frequency Range | 16 frequencies spaced 2MHz apart (from 2.427GHz to 2.457GHz) |
| System Encoding | Secure 256-bit binary encoded packet, with validity verification |
| System Latency | 1/4000 typical delay from closing of camera contact to receiver sync output signal |
| Sync Voltage | Up to 300 Vdc from a connected flash unit |
Related Products
